手动工具 Manual Tool                                                                                     

• STK provides the whole manual tools which is applied for high pressure.It can be manually complete the inner hole、chamfering cylindrical、teeth、steel tubing thread.

STK提供完整的用于超高压应用的手动工具,能够手动地完成内孔倒角、外圆倒角、钢管扳牙等。

• Size range can be machined in the 1/8”~9/16”,convenient installation , test and repair.

尺寸范围在1/8"~9/16"都能够加工,方便现场安装,调试,维修。

• The STK tool is the only ultra pressure tool manufacturer in China,our products can replace foreign products perfectly.

STK是中国高品质超高压工具的生产商,其产品完美地替代了进口产品。

 手动工具 Manual Tool                                                                                       

• Coning Tool can process tubing taper,angle is about 57°~59°.

倒外圆锥工具可以加工钢管的锥度,角度约57°~59°。

• Chuck and bit tool can be replaced,the same tools can be processed tubing of 1/4 "O.D、3/8 " O.D、9/16" O.D.

夹头,刀具可以更换,同一个工具可以加工 1/4" O.D、 3/8"O.D、9/16"O.D钢管。

• Adjusting gland nut,can adjust the depth of processing.

调节压紧螺母,可以调节加工的深度。

技术参数 Tecnnical Parameter

型号

Part No.

钢管尺寸

For Tubing Size

CT2 1/8"O.D
CTA 1/4"O.D
3/8"O.D
9/16"O.D

 手动工具操作指南 Manual Tool Operation Guideline                                        

倒外圆锥操作说明 Inverted conical operation instruction

• Clamping fixed block of coning tool.

把倒外圆锥工具上固定块固定。

• Adjust the slot width is slightly larger than the length of the cutting cone , loosen the gland nut , put the tube into the collets inside ,l ock gland nut.

调整退刀槽的宽度稍大于切削锥面长度,松开螺母,把钢管插入夹头里面,锁紧螺母。

• In the observation hole drops into the cutting oil , so that the cutting edges maintain lubricating.

在观察孔上滴进切削油,使切削刃上保持润滑。

• Right hand turn the handle,at the same time left hand rotation screw gland nut(clockwise) , at the beginning of the handle feels heavier , when the rotary gland is screwed almost to the end , speed up the rotation speed of the handle , When handle feels relaxed , show that complete the cutting , loosen the gland , pull out the tube and check the cone if is suitable , if not , continue above operation.

右手转动手柄同时左手也旋转旋紧螺母(顺时针),初期手感较重,当旋紧螺母接近到底时,加快手柄旋转速度;当手感轻松,表明切削完成,把螺母松开,抽出钢管观察锥面是否合适,如不够继续上述操作

手动工具操作示意图


 
QQ在线咨询
咨询热线
0755-27967260
销售热线
18688799549