扳牙工具 Threading Tool

二、板牙操作说明:

1. CT工具上的固定块固定(水平或垂直安装);

2. 把旋紧螺母松开和手柄一起拿掉;

3. 松开螺母,把钢管锥面朝外插进夹头里面锁紧螺母(如图示);

4. 在板牙工具上的观察孔上滴进切削油,使牙刃上保持润滑;

5. 双手握住手柄,把板牙孔压紧套住管锥端,逆时针用力转动工具,每转动12转就要退转,使切削屑排出,再进转,根据所需长度把左旋螺纹切削出来,最后反转工具完全退出,板牙完成。

二、Threading operation instruction:

(1)  Clamping fixed block of coning tool (horizontal or vertical

installation)

(2)  Loosen the tighten gland nut,and remove the handle together

(3)  The pipe cone inserts into the chuck outward,and lock the

gland(see picture)

(4)  In the observation hole drops into the cutting oil,to maintain

lubricating on blade teeth

(5)  Hold the handle with both hands,the threading hole pressing to

trap the cone end,in a counter clockwise rotating forcibly tools,turn

back after each turn 1~2 rounds,chip cutting discharge,then turned

into,according to the required length of the left-hand thread cutting

out,finally inversion tools completely out



 
QQ在线咨询
咨询热线
0755-27967260
销售热线
18688799549